MEYCO® MP 325
MEYCO MP 325 is a “one component” injection system, based on a nanometric colloidal silica suspension. The open time can be adjusted with an accelerator. The product may be used between 40 °F and 105 °F (5 °C and 40 °C) and contains neither solvents nor toxic components. The gel time may be adjusted by varying the quantity of accelerator for MEYCO MP 325 added to Component A. Due to the hydrophilic nature of the product, it also adheres well to wet surfaces. There is no foam reaction that can negatively influence the bond. Equipment can easily be cleaned using water.
Features
- Very low viscosity
- Workable between 40 °F and 105 °F (5 °C and 40 °C)
- Uses simple mixing and pumping equipment as used with cementitious grouts
- Can be used with both one- and two-component pumps
Benefits
- Excellent penetration
- Controlled gel time with the use of an accelerator
- Improved working safety, reduced environmental impact and low handling costs
- Non-aggressive
- Good bonding to wet surfaces
Product Information:
U.S.
Canadian